transmitter wont calibrate!!!!!

[larry marino]

transmitter wont calibrate worked fine before; reloaded program in computer but that didnt do anything; wish i bought real flight instead!

[Steve Lewin]

Since you don't bother providing any information about what transmitter, interface type, operating system etc you're using helping you is impossible.

...good luck with Real Flight.

Steve

[grouchy1]

Mine won't calibrate either. My FMS came with the Esky 0905A 4 channel controller. The box says it's version2.0 beta 7. The green bars move when I calibrate, although some look reversed, but when I go to the sim nothing works. Help!

[Stutz Jr]

I'm only new to the RC simulator field but I recently solved the calibration issue I was having. I found that once I installed the USB interface cable driver for my Twister RC transmitter, I first had to go to windows control panel and select the "game controller" device there and do its own calibration before starting FMS.
Once I had loaded FMS - analog control / joystick interface / mapping & calibration, I had to remap every control surface by trial and error, and only then did the game's own calibration - and it has worked perfectly ever since.

FYI: the mapping I used for my 4 channel Twister RC was: 4, 2, 1 (inv), 3, 4, 2, 1 (inv), 3