Need help. I want to Simulate My E-Sky 4 channels transmitter model 0404 come with USB cable (EK2-0900A) to connect to my PC for simulation for LAMA V4 Helicopter EK1H-E033 ( SoftDog ). Software FMS 2.0 Alpha 8.3
After instal and setup try to configure and locate the USB interface port, but no such interface port for USB. Can used the Key Board.
Can someone kindly help solve my problem. Many thank in advance.
E-SKY 4-Channel Transmitter model 0404
6 posts
• Page 1 of 1
E-SKY 4-Channel Transmitter model 0404
by cntan168 » Tue Jun 24, 2008 11:18 am
- cntan168
- Posts: 3
- Joined: Tue Jun 24, 2008 10:48 am
- Location: Singapore
by stevebaker » Wed Jun 25, 2008 9:17 pm
use the joystick option =>
rudder 4
elevator 2
aileron 1
throttle 3
tail 4
nick 2
roll 1
pitch 3
rudder 4
elevator 2
aileron 1
throttle 3
tail 4
nick 2
roll 1
pitch 3
- stevebaker
- Posts: 1
- Joined: Wed Jun 25, 2008 9:14 pm
E-SKY 4-Channel Transmitter model 0404
by cntan168 » Thu Jun 26, 2008 7:07 am
Thank for your reply. Donot have a Joy stick. Need to use the Transmitter 0404 come with the set.
tan
tan
- cntan168
- Posts: 3
- Joined: Tue Jun 24, 2008 10:48 am
- Location: Singapore
by Steve Lewin » Thu Jun 26, 2008 8:11 am
What stevebaker means is that FMS sees your USB cable as a joystick. So you need to be calibrate and set it up within FMS using the Controls/Analog Control/Joystick.....Mapping/Calibration screen.
Steve
Steve
- Steve Lewin
- Posts: 816
- Joined: Mon Jun 18, 2001 2:32 pm
- Location: N. Staffs, UK
Try calibrate no luck
by cntan168 » Fri Jun 27, 2008 9:22 am
- cntan168
- Posts: 3
- Joined: Tue Jun 24, 2008 10:48 am
- Location: Singapore
Re: E-SKY 4-Channel Transmitter model 0404
by aviatorex1 » Mon Oct 03, 2011 9:54 pm
I am unable to use my joystick with fms simulator. Everything else is ok
- aviatorex1
- Posts: 3
- Joined: Fri Sep 30, 2011 5:49 pm
6 posts
• Page 1 of 1
Who is online
Users browsing this forum: No registered users and 2 guests