A great discovery for almost all of problems

[philip ng]

A very easy and simple methord to solve all interface problem.
please go to this web site(only chinese version) http://ns1.buyjia.net/~unforget/taco/fm ... ms2000.htm

the follows is the summery how to do:
1. connect a cable to a audio jack with a 10K resistor as the ? ? picture shown.

2. download the sofeware provided (smartpropo 157K)

3. install the sofeware. after, a smartpropo directory will
? appear in your program file of your computer.

4. selected the winmm.dll document from the directory
? which match the type of your control. ?(my radio is sanwa
??RD6000 SUPER, although no such can be found ,however,
??I selected FUTABA, it still work with SANWA)

5. copy this file to the install page of your FMS.

6. connect the jack to the microphone terminal.

7. open the recorder from your computer and test it, if it is
? not smooth, you can adjust the volume.

8. play FMS and calibration from joystick interface
? of control of FMS.

9. step by step set up the number match the stick respond
? to thorttle, rudder......etc. and final calibrate the control.

10. good fly

[philip ng]

You need to turn on the control to play with this methord

[lego]

This is cool - i must try that!
I fist used a 4D Joystick and now im using my gamepad (that has 2 analog sticks) and started to look for a Tx interface but found only extremy overpriced products...

Many thanks for the hint and the link!!!!!!!

[philip ng]

[philip ng]

today, i had format my computer and reinstallation all application, after that, i can't play my FMS. after half of hours,
i found the reson. U may encounter this problem after u made the cable.
if u find it donsn't work, please go to the control panel of your computer, select the sound and wave device, access it and select WAVE then u will see an icon like a microphone in the middle of the screen. then click volume(o), a control panel will appear, just click the box of MICROPHONE in the left hand side of the panel to active the microphone.
U can think that the cable is connect in to the microphone jack, if it is not activate, how can it work, therefor, active it, it must work again