by Jeff Knickelbein » Wed Jan 31, 2001 4:28 pm
You might have the same problem I had with the JR system. I don't know the Airtronics system, but the JR system sends the signals out at 1 volt from the trainer socket, which needs to be amplified to 5 volt logic levels. There is a circuit I designed in the JR X652 topic in this Forum. You will have to get hold of an oscilloscope to check the exact signal levels etc.
Jeff Knickelbein[br]Two wrongs don't make a right, but two Wrights made an aeroplane.