Spektrum DX6i

[mikethebike]

Hi
I just got a fms cable from a hongkong dealer. I stick it into trainer ( transmitter ) and USB ( pc ) but nothing moves.
What is wrong?
Thanks Michael

[LEADTONGUE]

HEY MIKE! CHECK IN YOUR DEVICE MANAGER-LOOK FOR PORTS{COM+LPT} YOU SHOULD SEE A PORT THERE -CYPRESS USB HID-CLICK ON IT-UNDER PORT SETTINGS MAKE SURE U HAVE 9600,8,NONE,1,NONE SELECTED.GO TO ADVANCED TAB MAKE SURE COM3 IS SELECTED. START FMS AND HOOK UP UR TRANSMITTER. GO TO THE CONTROL TAB IN FMS- CHOOSE ANALOG THEN CHOOSE PIC INTERFACE-CLICK RESOURCES TAB-MAKE SURE 9600 AND COM3 ARE SELECTED-CLICK OK.
THEN CLICK MAPPING/CALIBRATING TAB. HOPEFULLY YOU WILL SEE UR TX BOX RESPOND WHEN U MOVE UR STICKS. IF YOU DO HERE ARE THE SETTINGS U NEED-RUDDER=4 NOCHECKS-ELEV=3 NO CHECKS-AILERON=2 CHECK INV NO CHECK FOR EXP-THROTTLE=1 CHECK BOTH INV AND EXP- TAIL=4 CHECK EXP-NICK=3CHECK EXP-ROLL=2CHECK EXP-PITCH=1 NO CHECKS AT ALL. IHAVE THE DX6I TX AND IM LEARNING TO FLY BLADE 400 GOOD LUCK!

[tentionfree]

Sad, as if position and attitude was exported in any way, FMS would be so much more usable for us UAV freaks....

[ggunners]

I believe ClearView exports that information. Try it out for $40. -- ggunners