New ParkZone F-27Q Stryker

[ggunners]

Hello FMS'ers,

I just wrapped up the alpha version of a for our FMS sim.



Notes: The ParkZone F-27Q Stryker is a brand new beast of an
airplane. Borrowing from the two older generations and breaking
new ground for a delta wing design, ParkZone has shown some
amazing capabilities in this new model. New to this version are
the dual rudders and fiberglass reinforcements. I saw this model
at SEFF 2011 and seeing the blenders, flat spins, elevators,
knife edge, snap rolls and the new dive-n-stop were just awesome.
This model is sure to sell well and looks like a whole bunch of fun.

http://www.parkzone.com/Products/Defaul ... ID=PKZ5680

Wing Span: 37.1 in / 943mm
Overall Length: 24.1 in / 612mm
Flying Weight: 30.0 oz / 855g
Motor Size: 480 power (2200Kv) brushless outrunner motor
Prop: 6x6
ESC: 40A brushless
Battery: 3-cell 11.1V 2200mAh 25C LiPoly
Channels: A/R/E/T four DSV130M digital servos
Receiver: AR600 DSM2 6-channel
Requires: full-range DSM2 aircraft transmitter (sold separately)

Please compare this FMS version to the real rc model and let
me know what changes need to be made.

-- ggunners

[fms63v8]

Hello.

1) This is a setting method using the bug of FMS.
It is different from a standard setting method.

2) Staggering of the aileron is eased, and it becomes easy to control only a little.

3) This method is effective only at "AUTOELEMENT" setting.

4) It is not possible to use it at "ELEMENTDATA" setting.

--------------------------------------

WING

//Wing1 <LEFT>
-0.0051 -0.2601 0
0.848 -0.5299 0
0.5299 0.848 0
1
0.472
4
AUTOELEMENT
0
0.14
0.38
0.095 // Change in parameter
0
0.13 // Change in parameter
-30
3

//Wing2 <RIGHT>
-0.0051 0.2601 0
0.848 0.5299 0
0.5299 -0.848 0 // Change in parameter
1
0.472
4
AUTOELEMENT
0
0.14 // Change in parameter
0.38 // Change in parameter
0.095 // Change in parameter
0.13 // Change in parameter
0 // Change in parameter
-30 // Change in parameter
3

[ggunners]

Thank you fms63v8, I will try your changes. -- ggunners