glenfraser wrote:Does the radio you are using have a buddy box conector on it?
Sounds like it may do. If so what you will need to do is go into the properties page on the joystick setup and make sure when you move a stick the the cross moves in the setup page. You idealy need the pin out of the connector on your radio to see which pin the signal is comming out of. And if any links need sticking in. Once you get the joystick moving you need to get into FMS and then set it up....
You need that to plug the radio into the usb cable.
Some radios dont support PPM output. That needs to be checked in the manual.
Users browsing this forum: No registered users and 0 guests