Walkera 6 channel transmitter and simulator

[Tech]

Hello

How can one operate the Walkera 6 channel transmitter at a simulator?
The 6 channel Walkera transmitter has another output signal than the 4 channel Walkera transmitter!
Is there a building guidance for the cable?

Thanks

[phildc]

Searching on these words in this forum will probably help you.

- Zhen Hua
- Diagnostic

Phil.

[phildc]

Would suggest this approach:
- find ground and signal on the transmitter plug.(virtual scope)
- determine if PPM (channel width simply varies when stick is moved) or CODED (PCM)
- read PCM as RS232
- if Zhen Hua, try PPJoy Com Zhen Hua 5...
- may use Eric Brouwer's tester
- if PPM, normal PPJoy

[ShellDude]

These 3 threads should be consolidated.

This one

The one in the Joystick forum


And the one in the Serial PIC forum

[David_Neumann]

Hello I have the same problem, invalid sinc walkera tx6 and fms is not working, If anybody know how to solve the problem I will apreciate very much.