I have a Century Elite 4 TX and bought from Century the FMS Flight simulator CD and interface. I installed FMS version 2.0 alpha 8.5 on a desktop machine with XP Prof.
I found out that the throttle and rudder control are interchanged.
I tried replacing mapping/calibration so that
rudder is channel 4
elevator is channel 2
aileron is channel 1
throttle is channel 3
I also tried using winmm.dll from diferent manufacturer.
These adjustment still does made any difference in controlling.
The rudder and throttle are interchange, plus the sensitivity of the throttle compared to the rudder makes it so difficult to control the model. Since slight movement on the throttle will make the model tilt to either side and you need to a large movement on the rudder to make to moel go up or down.
Please advise.
Thanks
Mike M