protocol for the 19200 + 0xFF?

[nati]

This is the protocol for the 9600 + 0xF0:

Serial Protocol Used

The serial output is at 9600 baud, 8 data bits, No parity and 1 stop bit. The first character will be in the range 241 to 248 decimal, this is made up from 240 + the number of pulses measured. The second character contains the status of 4 push buttons that can be connected to the interface unit. The third to last (max 16) characters contain the values of the control channel pulses. Decimal 100 = 1mS, 200 = 2mS.

What is the protocol for the 19200 + 0xFF?

thanks

[Michael_Moeller]

[phildc]

[nati]

thanks
every thing now is o.k

a new Q

does the protocol remain the same in the new ver (FMS 2.0 Alpha 8.5)?

what is the name of the of old keyboard conector that fit to the r.c?
i want to bye it but i dont now how it called.

[phildc]

If you are speaking about this


it is called a 'DIN connector', but there are various types.

Look at:

The reference for transmitter connections, and signal, pins, a.s.o. is


Some useful tools are also described here:


Phil.