PIC96 Cable with P51 PTS - Repair

[jomo]

Hello-

I have a JR PIC96 cable that is busted. I tried to run the sim the other day and no response. Long story short - opened the D9 connector and there are three leads, a red lead,white lead, and a ground. The ground is soldered to the IC board, the red & white came loose.

My problem - I have no clue where to solder these two leads back to.

If anyone has one of these cables. Could you open the D9 connector and simply take a close up picture of both sides - especially the side the leads are connected to.

Appreciate your time,
john-