FMS Forum

by **shaul_eiz** » Sat Sep 09, 2006 9:59 pm

Which Tx are you using. Is it some 6 chanel CCPM version?

by **Come fly with me** » Mon Sep 11, 2006 5:30 pm

wot dose Tx mean? how do i know wot My Tx is im very much confused

by **shaul_eiz** » Mon Sep 11, 2006 6:28 pm

Sorry about the jargon.
Tx = Transmitter (some call it controller).
Now you know what Tx you have.

by **Come fly with me** » Tue Sep 12, 2006 5:21 pm

Oh in that case i guess if u mean Tx is if im using a transmitter that i can use for my real planes then no im not using a Tx

by **shaul_eiz** » Tue Sep 12, 2006 7:11 pm

Well, you wrote you use E-Sky....

by **Come fly with me** » Tue Sep 12, 2006 8:23 pm

It is a E-sky and all it has is a cable from it that gose staright into the usb port thats all there is on it was that any help to you?

by **shaul_eiz** » Tue Sep 12, 2006 8:29 pm

OK, Now you're talking.
Either your Tx or USB cable are dead, which is probably not the case, or you have to re-install the thing.
I'd start with un-pluging the USB then plugging it again in another USB socket. You will probably get some notification from your computer. Now start FMS again, and try to calibrate.
If still not working, let me know and we'll try something else.

by **Come fly with me** » Thu Sep 14, 2006 1:05 pm

I just ried that and nothing happened its still doing the same thing

FMS Forum

Control has a mind of it's own

Control has a mind of it's own

Who is online