Another E-Sky problem

[THUDMAN]

XP fails to see the left stick. In ressources it see all 4 axis's, but mapping/calibration only will calibrate pitch and roll. I'm using the USB upfront controls. Read almost every thread without finding a workable solution. Getting tired of flying using the transmitter for roll/pitch and keyboard for throttle/yaw.
Thanks for your time.

[aeropal]

[THUDMAN]

[aeropal]

I can't really offer any suggestions . . hopefully others will respond. Although the Esky 0905A USB sim controller is "plug & play" for most users, a few are experiencing . Trying your controller on another computer might rule out conflicting peripherals (palm pilot?), conflicting software, or setting issues.

[websterphreak]

I have the same E Sky Sim controller and have used it on a few different Win XP based PC with no issue being recognized as a USB HID (Human Interface Device). I should be a simple P-n-P set up in Windows 2000, XP or Vista.

I'd suggest that you may have botched the initial P-n-P set up, so you'll need to delete it from the "Hardware" listing in the "Control Panel". Just make sure you're sellecting the right piece of hardware (not your USB mouse, keyboard, etc) and just highlight it and click on remove from the menu.

Then reboot your PC and reconnect the E Sky and watch the pop-up windows as XP recognizes the device.