by ggunners » Thu May 06, 2010 2:52 pm
There is already a reply on the site about calibrating a controller. Many controllers are different.
If your controller has mixing, turn it off.
Within the calibration screen, for a US controller, move the sticks and assign the channels.
If they are backwards when flying, click on the INV. Use the EXP (Expo) for aileron and rudder
to make controlling the airplane easier.
Left up/down throttle.
Left right/left rudder.
Right up/down elevator. (pull back points up)
Right left/right aileron.
Once channels are assigned for airplanes, copy to helicopters.
-- ggunners