Just "no results" is not enough information for a practical diagnosis
.
Steve
Spectrum DX6 TX
4 posts
• Page 1 of 1
Spectrum DX6 TX
by nelsonmay » Mon Oct 30, 2006 12:35 am
- nelsonmay
- Posts: 2
- Joined: Mon Oct 30, 2006 12:30 am
by Steve Lewin » Mon Oct 30, 2006 8:46 am
Mono or stereo cable ? What did you plug the cable into at the PC end ? What software are you trying to use it with ? What have you tried to do yourself ?
Just "no results" is not enough information for a practical diagnosis.
Steve
Just "no results" is not enough information for a practical diagnosis
.
Steve
- Steve Lewin
- Posts: 816
- Joined: Mon Jun 18, 2001 2:32 pm
- Location: N. Staffs, UK
by shaul_eiz » Fri Jan 12, 2007 5:55 pm
For any purpose relevant to us here, DX6 & DX7 are just JR PPM transmitters. You can use any cable that has a mono 3.5mm jack to connect to the transmitter. As for the PC side, use USB, serial or audio jack as long as you use the correct software.
I offer to use my in conjunction with the audio (e.g. Microphone) socket. You will only have to purchase or create a simple mono-mono cable (mono 3.5mm jack on both sides).
I offer to use my in conjunction with the audio (e.g. Microphone) socket. You will only have to purchase or create a simple mono-mono cable (mono 3.5mm jack on both sides).
- shaul_eiz
- Posts: 356
- Joined: Sat Jun 18, 2005 6:54 am
- Location: Tel Aviv, Israel
4 posts
• Page 1 of 1
Who is online
Users browsing this forum: No registered users and 9 guests