There are still problems reported with the COM connection to PPJoy. The signal is detected, but not recognized by FMS or other sim.
In order to try to understand the problem, may I ask you to copy the results of a test with
in this post.
Just do 'Action' -> 'Start Comm'
The default settings are OK, if you are on COM1.
Leave all commands at neutral, and throttle at minimum.
Tell us your transmitter and cable type (if any ?), and by which component your signal is recognized, and also if a simulator (name?) can read it. And any other remark that you think can be useful.
Thanks beforehand for your cooperation,
Philippe.