by phildc » Sat Oct 01, 2005 1:21 pm
Checked further with Joystick.exe:
My joystick was #2 in the system,
so a #1 should be:
Ail= 1
Elev=2
Thr=3
Rudder=4
Phil.
Note: this soft can modify the channels (trim, epa,..) like a real transmitter, and outputs the modified signal on one of the COM ports.
The (simple)PCM output signal is recognized by FMS as serial PIC 19200, synch FF.
It can also be used as source for my other softwares.