Hyperfly - Hyperfly model

[Larry]

Can anyone help me with a Kyosho Hyperfly model. I am new to flying and got a Hyperfly Heli since it is only two channel it is hard to use the other models. I dont know how to modify one of the others to only two channel and a fixed pitch. Could someone help with a model to learn on the simulator to learn. Thanks

[johnhlong]

Are you sure it's only 2 channel?
I would think it would need at least Elivator, Alerion and throttle?

I've got some ideas but need more info.

Will you be using a transmitter or joystick?

John Long
Seattlr, WA
USA

[Larry]

It has fix full throttle and is electric. The pitch is fixed also the tail is a large dish like and maintain itself by a forward movement of about 4-5mph. It has to land in a slight forward movement like a plane and has a cutoff switch that shuts the power on landing. It has to be hand launched so doesnt leave much on the learning end on crashes. I have a joystick that I'm using now with throttle so I could make it close to my transmitted right now. You can see this heli on the Kyosho website SPECIFICATIONS
Stock Number: KYOE0225
Length: 33.5 in (850 mm)
Rotor Diameter: 22.8 in (700 mm)
Weight (w/battery, RTF): 25 oz (700 g)
Motor: LeMans AP29 (included)
Requires: 2-channel, aircraft frequency radio w/2 standard servos & BEC receiver; 7.2V, 1100 mAh NiCd battery; and charger (peak charger recommended)

[johnhlong]

This could be a chalange!

I would start by using the "Piccolo" helicopter modle.
It is a small simple electric helicopter.

Set up the joystick to control the elevator and aileron )Roll).
Set the pitch and tail to channel 0 (this will switch then to use the keyboard inputs).

I can E-Mail you the Piccolo if you can't find it.

John Long
Seattle.WA
USA