Der Futaba PCM 1024H Handsender kann über die DSC-Buchse an den FMS angeschlossen werden.
Die Belegung ist wie folgt:
Ansicht auf die Buchse im Sender,PIN 1 ist links unten:
Anschluss B auf PIN 2
Anschluss A auf PIN 4 oben in der Mitte
Signalspannung 1,72 V
Interfaceaufbau entsprechend der Angaben im FMS-Handbuch mit einem Widerstand 680 Ohm und einer Z-Diode 4,7V.
Rainer
(Edited by Rainer at 11:43 pm on April 17, 2001)