HI Guys,
I am brand new to the RC scene, I have Just brought home my first chopper and step 1 is practicing on FMS! ( if only i could get it working )
I have installed it on my desktop ( running windows XP ) and my laptop (running windows 7 ).
I have the same problem with both machines.
The transmitter is a CX-CT6A ( copterX )
Let me just run through what i have done:
1) installed the remote drivers first ( PL-2303 driver installer.exe )
2) then plugged the cable in, the pc found new hardware , and installed it ( after 5 mins )
3) then installed T6config. ( version 1.0 )
4) plugged cable into remote and turned it on
5) installed FMS ( version 2.0 alpha 8.3 )
When i open T6config and select wich com port i need, the green bars move around when i play with the remote,
So the PC is " seeing " the remote.
When i run FMS and go to controll -> Joystick interface - > Mapping / calibration
I see the mapping and the channels, I have inputted the correct values for the mapping
but when i try and calibrate, there is no movement from the blue lines. When i play with the
remote nothing happens.
Any idea what I am missing ?
If i go to Joystick interface and click on " ressources "
Joystick 1 : not available
Joystick 2 : not available.
I hope someone can help.
Thanks
!!