I was assuming they were editable with Notepad. They appear to be text files, for example the one that I was speaking about contains stuff like this .....
VERSION 1.0
INFO //Free Form Comment Area, does not change model
Name: HobbyZone Super Cub //Plane Name
Scale RTF ParkFlyer //Type of Plane
Spannweite: 1.20 m //Span (m)
Gewicht: .71 kg //Weight (kg)
Motorisierung: 480 //Engine
Prop: 10x8 //Prop
Akku: 7 cell //Battery (6 Zellen = 6 cells)
Kapazität des Akkus: 1000mAh //Battery Capacity
RC-Funktionen: //RC Functions
Kanal 1: Rudder //Channel 1 (Seitenruder = Rudder, Heckrad = tail wheel)
Kanal 2: Elevator //Channel 2 (Höhenruder = Elevator)
Kanal 3: Aileron //Channel 3 (Querruder = Aileron)
Kanal 4: Motor //Channel 4 (Motordrossel = Engine Throttle)
This model is modified from original and 4 channel with reduced dihedral.
3D Model Author: Gary Gunnerson //Model Author
e-mail: mailto:garyg51384@aol.com
WebSite:
http://gunnerson.homestead.com/files/fms_models.htmHobbyZone Super Cub:
http://www.hobbyzone.com/rc_planes_hobb ... er_cub.htmENDINFO //ENDINFO, end comment area
// <ParEditor Ver1.6 2006-04-23 Masuoka Hideaki>
// ParEditor.Scale=119
// ParEditor.Data1= 0.6308 0.6308 0.3154 0.3154 0.9463 2.506 2.505
// ParEditor.Data2=0.1925 0.075 0.075 0.0144 0.0071 0.0379 0.308 0.7099
// ParEditor.Data3=0 0 0
// ParEditor.Data4=0 0 2 2 -1 -5
// ParEditor.Data5=2 -2 1 -1 0 0
// ParEditor.Data6=1 1 0 0 -2 1
// ParEditor.Data7=15 13.702
// ParEditor.Data8=0 0 0 0
// ParEditor.Data9=12 8 5 5
// ParEditor.Data10=-20 -20 -20 -20
// ParEditor.Data11=50 50 50 200
// ParEditor.Data12=30 30 30 30
// ParEditor.Data13=5 3 1 0.3
AIRPLANE
MAIN
0.71 //Mass [Kg]
0.0497 //Roll Inertia Moment Ixx [kg*m^2]
0.032 //Pitch Inertia Moment Iyy [kg*m^2]
0.0731 //Yaw Inertia Moment Izz [kg*m^2]
-0.00087 //Ixz [kg*m^2]
0 0 0 //ÂdÂSˆÊ’uX,Y,Z [m]
0.23 //Height of Center of gravity [m]