vg400

[Alex Kerian]

i want to make an interfave for my airtronics vg400
ive looked at the fourms for some good plans but i also see people who have had problems with the adaptors
if u have any good links of some plans (you made the adaptor and it worked great) thanx for the help

[hiroboz]

Hi,

use this link for the transmitter pin outs. Use the picture for the RD6000, it is the want you want!

http://www.heliguy.com/nexus/fmsinterface.html
use this link for the cable. note the emitter on the left looking at the face.

I put the hood on the cable, solder the electronics, slide the hood almost on then fill it with 5 min epoxy. Works great.

Heres a link for transistor cross referencing!
[url=http://www.ee.washington.edu/circuit_archive/parts/cross.html

Just]http://www.ee.washington.edu/circuit_archive/parts/cross.html

Just[/url] in case you don't have a transistor, enter in the NPN2222a trans. and it will give you a big list of equal transistors to use. Print it out and take it to any electronics saler!

FMS is great! have fun building!!!