Hi,
I'm searching somebody with a FUTABA FC16 and A TRAINER PORT !
I opened mine, found insife on the main PCB (the one with the RF part) an empty connector labelled "trainer".
When looking the signal with an oscope, the magic pulses are here with an 4,7 V amplitude... so I'm on the way but I cannot disconnect the RF excepted if some "trainer circuitery" could do the job
I'm wondering if this radio cannot be equiped with the trainer port with very minor modifications ...(only an external DIN plug or so )
My question is, could you open your FC16 with trainer port, see if there is inside this training connector and describe me which kind of wires are connected between this connector and the external training port. A must would be a clear description of the wires colors and plug pins.Please check if the wires are simply linked pin to pin or if there is additional circuitery.
To find the internal trainer connector : it is located right in the middle between the last channel pins and the RF module. If needed I can post a photo ?
Thank you for the help
Alain